It is a long established fact that a reader of a page when looking at its layout.
Partitions & Infill Panels/Dry Lining
Traditional steel-framed drywall systems are built with light gauge stud and track profiles, which are supplied in lengths and cut to size on site. The assembler has to measure and place each piece accurately to ensure the wall is straight and the window and door openings are square true. This generates a lot of waste, as well as is time-consuming.
1. During a site visit the panel sizes are measured and entered into the easy-to-use panel software. The software will generate all the frames and joint details from the information entered. Openings such as doors and windows, as well as any bracing, can be added at this point. Alternatively, there are links to Bahal Buildcon machines from the leading software packages.
2. Once the files are complete, they can be sent to the factory for production.
3. . Once the files are checked and approved, they are produced on the Bahal Buildcon framing machine ready for assembly.
4. The panels are then bundled together with a printed panel drawing ready for dispatch to the site.
On-site the bundles are opened and assembled. With the aid of the drawing and the inkjet labeled parts.
